CN
EN
ES
RU
FR
AR
Contact Us for All Your Needs
Our professional team will be online to provide you with the most suitable products for you.
Main Part No.: DYZ1-63C/B60.S
Contact type: Bi-stable
Rated load current of contact(Resistive load): 63A×80V DC
Contact voltage drop: ≤40mV@63A
Insulation resistance: Min. 100MΩ at 500VDC
Dielectric strength (Between Insulated Electric Parts): 1500VAC 50 HZ/60 HZ (1 minute) Leak current＜1mA
■DYZ1-63C Series
■Contactor Data
|
Main Part No. |
DYZ1-63C/B60.S |
|
Contact type |
Bi-stable |
|
Rated load current of contact (Resistive load) |
63A×80V DC |
|
Contact voltage drop |
≤40mV@63A |
|
Insulation resistance |
Min. 100MΩ at 500VDC |
|
Dielectric strength （Between Insulated Electric Parts） |
1500VAC 50 HZ/60 HZ (1 minute) Leak current＜1mA |
|
Vibration |
(10～200)HZ、≤3.5g |
|
Shock |
(60～100)ops/minute、≤4g |
|
Lightning stroke |
8/20us 10/20KA lightning test ±5 times each |
|
Pollution level |
III |
|
Working duty |
Continuous |
■Coil Data
|
P/N |
Coil voltage |
Coil operating voltage（V） |
Pick-up voltage（V） |
Drop-out voltage（V） |
Start power（A） |
Coil Power（W） |
|
DYZ1-63C |
60V |
36～72 |
≤42 |
≤42 |
≤0.4 |
≤24 |
|
48V |
28.8～57.6 |
≤33.6 |
≤33.6 |
≤0.5 |
||
|
24V |
14.4～28.8 |
≤16.8 |
≤16.8 |
≤1 |
||
|
12V |
7.2～14.4 |
≤8.4 |
≤8.4 |
≤2 |
■Part Numbering System
Example: DYZ1-63 - c/B60. S. indicates Magnetic latching DC contactor, rated current at DC-1 load is 63A, coil voltage is DC60V.Products with magnetic blowing, with auxiliary contact.
■Shape installation and circuit diagram (Unit: mm)
DYZ1-63C/□.S
|
Dimension（mm） |
Tolerance grade not noted（mm） |
|
0～30 |
±0.3 |
|
30～60 |
±0.5 |
|
60～100 |
±1 |
|
＞100 |
±2 |
Note:
1. Main circuit connects copper bus bar which is silver plated;
2. Auxiliary contact connecting plate is silver plated;
3. The product coil has positive and negative pulse excitation, excitation time 50ms≤ T ≤200s.The coil shall not be continuously energized for long periods, the operating frequency shall not exceed 6 times per minute, and the pulse shall be square wave. Positive pulse (" + "is connected to the power supply positive," - "is connected to the power supply negative) makes the contact pick-up, negative pulse (" +" is connected to the power supply negative, "-" is connected to the power supply positive) makes the contact drop-out. After the coil is de-excited, the state of the contactor is maintained in permanent magnetic.
GET A QUOTE