CN
EN
ES
RU
FR
AR
Contact Us for All Your Needs
Our professional team will be online to provide you with the most suitable products for you.
Model: DYZ1-125C/□
Contact type: Bi-stable
Rated load current of contact(Resistive load): 125A×80V DC
Contact voltage drop: ≤50mV@125A
Insulation resistance: Min. 100MΩ at 500VDC
■DYZ1-125C Series
■Contactor Data
|
Model |
DYZ1-125C/□ |
|
Contact type |
Bi-stable |
|
Rated load current of contact (Resistive load) |
125A×80V DC |
|
Contact voltage drop |
≤50mV@125A |
|
Insulation resistance |
Min. 100MΩ at 500VDC |
|
Dielectric strength （Between Insulated Electric Parts） |
1500VAC 50 HZ/60 HZ (1 minute) Leak current＜1mA |
|
Vibration |
(10～200)HZ、≤3.5g |
|
Shock |
(60～100)ops/minute、≤4g |
|
Lightning stroke |
8/20us 10/20KA lightning test ±5 times each |
|
Pollution level |
III |
|
Working duty |
Continuous |
■Coil Data
|
P/N |
Coil voltage |
Coil operating voltage（V） |
Pick-up voltage（V） |
Drop-out voltage（V） |
Start power（A） |
Coil Power（W） |
|
DYZ1-125C |
12V |
0.85US～1.1US |
10%～80% |
10%～80% |
≤6 |
53W |
|
24V |
≤3 |
|||||
|
48V |
≤1.5 |
|||||
|
60V |
≤1.2 |
■Part Numbering System
Example: DYZ1-125 C/B60. S. indicates Magnetic latching DC contactor, rated current at DC-1 load is 125A, coil voltage is DC24V.Products with magnetic blowing, with auxiliary contact.
■ Outline mounting dimension and circuit diagram (Unit: mm)
DYZ1-125C/□.S
|
Dimension（mm） |
Tolerance grade not noted（mm） |
|
0～30 |
±0.3 |
|
30～60 |
±0.5 |
|
60～100 |
±1 |
|
大于100 |
±2 |
NOTE:
1. Silver plating of copper bar for main circuit wiring;
2. Auxiliary contact wiring plate is silver plated by default;
3. The product coil adopts positive and negative pulse excitation, and the excitation time is 50ms≤ T ≤200ms.The coil shall not be continuously energized for long periods, the operating frequency shall not exceed 6 times per minute, and the pulse shall be square wave.Positive pulse (" + "is connected to the power supply positive," - "is connected to the power supply negative) makes the contact closed, negative pulse (" +" is connected to the power supply negative, "-" is connected to the power supply positive) makes the contact disconnected.After the coil is de-excited, the contact state of the contactor is maintained by the permanent magnetic steel in the product.
GET A QUOTE