DC Contactor ZLJM-200C/A3

Model: ZLJM-200C/ □ A3

Contact form: Bi-stable

Contact Rating (at Resistive Load): 200A×60VDC （DC-1）

Contact Voltage Drop: Max.80mV @200A

Insulation Resistance: Min. 100MΩ at 500VDC

Contact Now >> Donwload

SPECIFICATIONS

■CONTACTOR DATA

Model	ZLJM-200C/A3
Contact form	Bi-stable
Contact Rating (at Resistive Load)	200A×60VDC （DC-1）
Contact Voltage Drop	Max.80mV @200A
Insulation Resistance	Min. 100MΩ at 500VDC
Dielectric Strength (Between Insulated Electric Parts)	1000VAC 50 Hz/60 Hz (1 minute) Leak current ＜1mA
Shocking of fixed point	(10～200)Hz、 Acceleration ≤3.5g
Shocking	(60～100) Ops./min、Acceleration ≤4g
Pollution Level	III
Mounting Way	Arbitrarily
Working Duty	Continuous

■COIL DATA

Model	Coil Voltage(V)	Coil Working voltage（V）	Pick-up Voltage(V)（V）	Drop-out Voltage(V)（V）	Starting Current (A)	Coil power dissipation(W)（W）
ZLJM-200C/A3	12	0.8US～1.2US	≤70%	20%～80%	≤1.2	11
	24				≤0.7
	48				≤0.65
	60				≤0.65

■Part Numbering System

Example: ZLJM-200C/48.S A3; said: Magnetic latching DC Contactor, 200A for DC-1 load rated current, coil voltage 48V DC, with aux. contact.

■SHAPE INSTALLATION AND CIRCUIT DIAGRAM

1、ZLJM-200C/□ A3 unit (mm)

2、ZLJM-200C/□ .S A3 unit (mm)

Dimension（mm）	Tolerance grade not noted（mm）
0～30	±0.3
30～60	±0.5
60～100	±1
>100	±2

NOTICE

1. Product coil is excited by positive and negative pluse,500mS≤t≤1S.long time continuous energizing is not allowed. Operation frequency should be no more than 6 ops/min. It`s square pulse(“+” connect with positive pulse, “-” connect with negative pulse) and positive pulse makes the contact close while negative pulse makes the contact open after the excitation ,the permanent magnet in product keeps the state of the contact.

2. Plug：SM-3A-HW Terminal：SMA-HW

3. Lead out wire

4. Plug wiring (red "+", black "-")

PREV
DC contactor ZLJM-400C/A1

NEXT
DC Contactor ZLJM-400C/A3